LINK INSTRUMENTS

LINK 20
Monitor Two Battery Banks
Link 20 is a battery monitor that provides complete battery status information for two battery banks simultaneously. A simple and easy-to-use interface displays volts, amps, amp hours, or operating time remaining. Link 20 allows you to select Automatic, Sleep and Scanning modes. Link 20 also measures and reports kilowatt hours and historical battery information such as number of cycles, deepest discharge, and average depth of discharge. It automatically calculates and displays charging efficiency. Since each battery bank has its own battery state LED bar graph, the status of either battery bank can be monitored at a glance. Monitor a house bank and starting bank or two house bank batteries at the same time. Link 20 can be used with 12 or 24-volt systems. Supplied with a dual 500A shunt.
Stock # LK20 Price - $309.00

LINK 1000
Monitor One Battery Bank and Control Your Freedom Inverter/Charger
The Link 1000 is an instrumentation and control panel designed for use with Freedom Marine, Combi, and 458 series inverter/chargers operated with a single battery bank. With the Link 1000, you have a single battery bank monitoring system that reads like a fuel gauge for your batteries – displaying battery state-of charge at a glance. With the touch of a keypad, you can independently control inverter and charger functions.
Stock # LK1000 Price - $265.00

LINK 2000
Monitor Two Battery Banks and Control Your Freedom Inverter/Charger
Link 2000 is a two-bank battery monitor with remote control for your Freedom Inverter / Charger. A simple and easy-to-use interface provides precise information on amp hours, kilowatt hours and historical battery information including number of cycles, deepest discharge, and average depth of discharge. Link 2000 automatically calculates charging efficiency.
Link 2000 and Freedom Inverters / Chargers communicate with each other via a standard 4 conductor telephone cable. This allows you to program four different battery types, battery temperature, AC power sharing and the inverter's idle mode sensitivity. The Freedom Inverter / Charger will also pass information to Link 2000's display such as error codes and charger status. Link 2000 also allows you to operate the Inverter / Charger remotely from the panel. Link 2000 can be used for 12 or 24-volt systems. Supplied with a dual 500A shunt and 25 ft of cable.
Stock # LK2000 Price - $449.00

LINK 2000R
Monitor Two Battery Banks and Control Your Freedom Inverter/Charger
The Link 2000R has the same features as the Link 2000 but includes an intelligent
3-stage alternator regulator.
Stock # LK2000R Price - $699.00
CABLES
Color-coded, twisted pair cable for easy installation. Available in 25 or 50 foot lengths
Stock # LK2014 25 feet Price - $45.90
Stock # LK2015 50 feet Price - $74.95